Cornelius VIPER E 2 FLAVOR Manual page 63

Viper Installation, Service & Decommissioning Manual
NOTE: Default daylight savings settings are for the U.S.
Button
BACK
CLOCK
DST
-
+
Step
1 Set daylight savings time
2 Select DST
3 Set DST on
4 Select SPRING MONTH
5 Set SPRING MONTH
6 Select SPRING WEEK
7 Set SPRING WEEK
8 Select FALL MONTH
9 Set FALL MONTH
10 Select FALL WEEK
11 Set FALL WEEK
When the daylight savings settings are complete, press the BACK button to save the settings and return to the Select menu.
Publication Number: 620073146SER
Figure 46. Daylight Savings Setup Screen
Table 38.
Returns the display to the Select menu
Opens the Clock menu
Highlighted to indicate DST menu
Decrements the highlighted field by one increment
Increments the highlighted field by one increment
Table 39.
Action
Press DST button at the bottom of display to open day-
light savings time display, shown in Figure 46.
Use the up and down arrows to select DST.
Use the + button to turn on daylight savings time.
Use up and down arrows to select SPRING MONTH.
Use the + or - buttons at the bottom of the display to
set the correct month.
Use up and down arrows to select SPRING WEEK.
Use the + or - buttons at the bottom of the display to
set the correct week. The choices are 1, 2, 3 or L.
Use the up and down arrows to select FALL MONTH.
Use the + or - buttons at the bottom of the display to
set the correct month.
Use up and down arrows to select FALL WEEK.
Use the + or - buttons at the bottom of the display to
set the correct week. The choices are 1, 2, 3 or L.
- 60 -
Description
Procedure
© 2022, Marmon Foodservice Technologies Inc.