Cornelius VIPER E 2 FLAVOR Manual page 27

Viper Installation, Service & Decommissioning Manual
Setting Daylight Savings Time
Once the date and time are set properly, the daylight savings time settings can be done. Display the Daylight Savings Time menu (Figure
21.) by pressing the DST button at the bottom of the display. To set daylight savings time, perform the procedure in Table 13.
Step
Set daylight savings
1
time
2 Select DST
3 Set DST on
4 Select SPRING MONTH
Set SPRING MONTH
5
6 Select SPRING WEEK
7 Set SPRING WEEK
8 Select FALL MONTH
9 Set FALL MONTH
10 Select FALL WEEK
11 Set FALL WEEK
When the daylight savings settings are complete, press the BACK button to save the settings and return to the Select menu, shown in
Figure 19.
Options Setup Menu
The Option Setup menu allows the user to set the various options available in the system. These options are listed in Table 14. The
functions of the display buttons change, depending on the highlighted selection on the Option Setup screen. The Option Setup menu is
shown in Figure 22.
Publication Number: 620073146SER
Table 13.
Action
Press the DST button at the bottom of the display to open
the daylight savings time display, shown in Figure 21.
Use the up and down arrows to select DST.
Use the + button to turn on daylight savings time.
Use the up and down arrows to select SPRING MONTH.
Use the + or - buttons at the bottom of the display to set
the correct month.
Use the up and down arrows to select SPRING WEEK.
Use the + or - buttons at the bottom of the display to set
the correct week. The choices are 1, 2, 3 or L.
Use the up and down arrows to select FALL MONTH.
Use the + or - buttons at the bottom of the display to set
the correct month.
Use the up and down arrows to select FALL WEEK.
Use the + or - buttons at the bottom of the display to set
the correct week. The choices are 1, 2, 3 or L.
Figure 21.
- 24 -
Procedure
© 2022, Marmon Foodservice Technologies Inc.