Cornelius VIPER E 2 FLAVOR Manual page 26

Setting the Clock
Highlight the CLOCK SETUP field from the Select menu, shown in Figure 19. This displays the Clock Setup menu, shown in Figure 20. To
set the time, perform the procedure in Table 11.
Step
1
2
3
4
5
6
7
To set the date, perform the procedure in Table 12. and refer to Figure 20.
Step
1
2
3
4
5
6
7
© 2022, Marmon Foodservice Technologies Inc.
Action
Use the up and down arrows on the right side of the con-
Set clock time
trol panel to highlight the TIME display on the screen.
Select hour field Use the left and right arrows to select the hour field
Use the + or - buttons at the bottom of the display to set
Set correct hour
the proper hour.
Select minute field Use the left and right arrows to select the minute field.
Use the + or - buttons at the bottom of the display to set
Set correct minute
the proper minute.
If the 12 hour clock option is selected, use the left and
Select AM/PM field
right arrows to select the AM/PM field.
Use the + button at the bottom of the display to set the
Set AM/PM
AM/PM setting, if using 12 hour format.
BAC - +
Action
Use the up and down arrows on the right side of the
Set date control panel to highlight the DATE display on the
screen.
Select month field Use the left and right arrows to select the month field.
Use the + or - buttons at the bottom of the display to
Set correct month
set the correct month.
Select day field Use the left and right arrows to select the day field.
Use the + or - buttons at the bottom of the display to
Set correct day
set the correct day.
Select year field Use the left and right arrows to select the year field.
Use the + or - buttons at the bottom of the display to
Set correct year
set the correct year.
- 23 -
Viper Installation, Service & Decommissioning Manual
Table 11.
Procedure
Figure 20.
Table 12.
Procedure
Publication Number: 620073146SER