Control Panel Overview; Setting Up The Control Panel - Cornelius VIPER E 2 FLAVOR Manual

Hide thumbs Also See for VIPER E 2 FLAVOR:

Installation manual (44 pages)

Service manual (75 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

Table of Contents

Behind the merchandiser is the control panel which includes the LCD display, shown in Figure 14. This panel controls all the functions of

the unit including defrost cycles, viscosity control, sensing of supply pressures and the incoming line voltage as well as other functions

and features.

ETTING

P THE

ONTROL

When the unit is initially powered up, the Main Check menu, shown in Figure 15. is displayed.

The software runs tests on the flash memory and the EEPROM. If they pass, PASS is displayed to the right of the appropriate line and the

system displays the System Check State screen, shown in Figure 16.

Once the System Check State verification is complete, the display automatically displays the Barrel Status menu. This is the normal or

home screen for the system when the unit is running properly. It shows the status of all barrels in the system, as shown in Figure 17.

During initial power up, the barrel status is off, indicating that the unit is in idle mode, with refrigeration off, product delivery off and the

barrel motor off.