Ricoh FT5034 Service Manual page 94

5.1 SERVICE PROGRAM MODE
1. Service Program Access Procedure
For service
Function
representatives
Access SP TURN ON
mode DPS101-2 ON
THE MAIN
BOARD.
Select the
SP mode
number
Change the
setting
Store the
setting
Reset the
SP mode
number
Leave SP TURN OFF THE
mode DPS101-2 ON
THE MAIN
BOARD.
For sales representatives and
customers
+
ENERGY SAVER
/CLEAR MODES
CLEAR/STOP
RECALL/ ENTER
ENTER THE DESIRED SP MODE
NUMBER USING THE NUMBER KEYS.
RECALL/ ENTER
PRESS THE "0" OF THE NUMBER
KEYS WHEN YOU WISH TO CHANGE
THE SETTING OF THAT MODE.
RECALL/ENTER
(TO GO TO
ANOTHER SP
MODE.)
CLEAR/STOP
ENERGY SAVER/CLEAR MODES
- 93 -
"00" WILL BE
DISPLAYED IN THE
MAG. RATIO
INDICATOR.
CLEAR STOP
"0" AND "1" WILL
BLINK ALTERNATELY
IN THE COPY
COUNTER.
THE SP MODE
NUMBER AND "1"
WILL BLINK
ALTERNATELY IN THE
COPY COUNTER.
THE DATA CHANGES
AS FOLLOWS:
→10→11→10→11→....
"0" AND "1" WILL
BLINK ALTERNATELY
IN THE COPY
COUNTER.
"100%" WILL BE
DISPLAYED IN THE
MAG. RATIO
INDICATOR.
Remarks