Ricoh FT5034 Service Manual page 38

10. Position the rear spring plate and hold it with your finger while inserting the mirror
into the rear spring plate through the hole in the front of the scanner.
NOTE: 1. Install the mirror with the reflecting surface uppermost.
2. Install the mirror with the cutout part facing down.
3. Attach the spring plate to the non reflecting surface.
11. Position the front spring plate.
12. Make sure that the mirror does not vibrate.
13. Remove the rest of the protective sheet.
14. Reinstall the other components.
Reflecting surface
Cutout part
- 37 -
Spring plate