Ricoh FT5034 Service Manual page 7

5. Perform the Drum Conditioning
(This operation must be performed after
developer and drum installation.)
1. Open the front right cover and move the
drum conditioning switch on the reverse
side of the operation panel to the left. Close
the front right cover and switch the power
on. (The Start key changes from red to
green after 2 min.)
2. Lower the platen cover and enter "99"
using the number keys and press the Start
key. (Drum conditioning takes about 5 min.)
3. After the drum conditioning is finished,
open the front right cover, move the drum
conditioning switch to the right and close
the front right cover.
4. Place the paper size actuator and size
decal on the cassette (A4 lengthwise or B5
lengthwise) and load paper into the
cassette.
5. Check the machine operation and copy
quality.
- 6 -
Drum Conditioning
Switch