Ricoh FT5034 Service Manual page 111

Item
Fusing Unit Hot Roller
Pressure Roller
Thermistor
Stripper Pawls
Fusing Entrance and Exit
Guides
ADF Transport Belt
Pick-up Roller
Sorter Transfer Wheel, Bin Guide
A worn out hot roller and pressure roller will cause fusing
malfunction, and dirty copies. Replace at regular
intervals.
If toner accumulates on the thermistor, fusing
temperature control may not be accurate. Inspect the
thermistor at regular intervals.
Toner or dust adhering to the stripper pawls can cause a
paper jam. Clean or replace the pawls at regular
intervals.
Toner piling up on the guide plate will cause a dirty
background on the copy.
Clean the guide plate at regular intervals.
A dirty transport belt can leave stains on copies. Clean or
replace the belt at regular intervals.
When dirty, it can cause a paper misfeed, and stains on
the copy paper. Clean this part at regular intervals.
Dust adhering to the transfer wheel or bin guide may
interfere with bin movement and result in uneven bin
positioning. Clean and lubricate these parts at regular
intervals.
- 110 -
Explanation