Ricoh FT5034 Service Manual page 39

6. Scanner Drive Wire Replacement
Damper Wheel
Scanner Drive Wire
1. Turn off the main switch.
2. Remove the platen cover, the mounting studs, and the top cover.
3. Remove the left scale (2 short screws) and the exposure glass.
4. Remove the rear cover (3 screws) and lower the PCB plate (2 screws).
5. Remove the damper wheel.
6. Loosen the wire clamp screw.
7. Remove the lamp stabilizer bracket (1 screw).
8. Move the 2nd scanner to the return position.
9. Unhook the tension spring and remove the spring. Take out the old wire.
10. Remove the home position sensor bracket (1 screw).
Wire Clamp
Tension Spring
- 38 -