Ricoh FT5034 Service Manual page 131

9. Distorted Copy Image
Problem
The copied image is a
parallelogram shape
Original
Copy (2)
Copy (1)
Front
Front
1. Check whether the scanners are parallel.
2. Copy case (1) - Raise the front side of the 1st scanner.
Copy case (2) - Lower the front side of the 1st scanner.
The 1st scanner and 2nd scanner are not parallel.
* This problem may occur if the scanner lock plate is not mounted
when transporting the copier.
Front side of 2nd scanner
Action
Cause
Image on the rear
side is moving ahead.
- 130 -
Copy (1)
Remarks