Periodic Inspection Of The Breaker; Checking The Breaker - Canon CLC 3220 User Manual

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Be sure to test the
breaker once or twice a month using the following procedure.
IMPORTANT
Make sure that the main power is turned ON, and the machine is neither printing nor scanning before
inspecting the breaker.
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.

Checking the Breaker

1
Push the test button with the tip of a ball-point
pen, or similar object.
IMPORTANT
Briefly push the test button.
2
The breaker lever automatically switches to
the OFF ("
power is cut OFF.
IMPORTANT
Do not use the test button to turn the power ON and OFF.
If the breaker lever does not switch to the OFF ("
If the breaker lever does not switch to the OFF ("
procedure two or three times, contact your local authorized Canon dealer.
3
Once you have confirmed that the power is
OFF, press the main power switch to OFF (" "
side).
xxii
" side) position. Confirm that the
" side) position, repeat step 1.
" side) position, despite carrying out the above