Fluke 96000 Series Service Manual page 16

96000 Series
Service Manual
•
•
•
•
1-6
The optional power sensor(s) contain components which
can be destroyed by electrostatic discharges. To prevent
this, never touch the sensor RF connector inner conductor
and never open the sensor. Never exceed the sensor
maximum RF power limit. Even brief overloads can destroy
the sensor.
Reliable and repeatable RF interconnections are achieved
only at specified torque settings. Performance will be
impaired if torque settings are not observed, and permanent
connector damage is likely to result from over-tightening.
To prevent damage to the Product, do not use aromatic
hydrocarbons or chlorinated solvents for cleaning.
To prevent the public transmission of an unintentional RF signal,
never connect the Product output to an antenna outside a shielded
room.