Overview of Remote Control
LAN Remote Control System
Control over telnet server
In the control system over a telnet server, communications are performed through a
connection between the network sockets, which is a path established between the external
controller and the E5052A.
A socket is an endpoint for a network connection; on the E5052A, ports 5024 and 5025 are
provided for the sockets. Port 5024 is used for conversational control using telnet (user
interface program for TELNET protocol) and port 5025 is used for control from a program.
Preparing the E5052A
To communicate with the external controller, follow these steps to turn on the telnet server
of the E5052A in advance.
[System] - Misc Setup - Network Setup - Telnet Server [ON]
2
37