SCPI Command Reference
:TRIGger:TR[1-1]:NARRow:VIDeo:THReshold
When the downconverter is turned on and the RF input is set to 'E5052A Direct'
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, the conversion mode used in the
frequency offset, the target frequency and frequency range of the narrowband mode)
When the downconverter is turned on and the RF input is set to 'Downconverter'
(Allowable setting range varies depending on the target frequency and frequency
range of the narrowband mode)
Equivalent key
TR Menu -> Setup -> Video Trigger -> Narrow Freq
:TRIGger:TR[1-1]:NARRow:VIDeo:THReshold
Syntax
:TRIGger:TR[1-1]:NARRow:VIDeo:THReshold <numeric>
:TRIGger:TR[1-1]:NARRow:VIDeo:THReshold?
Description
Sets/Reads the video trigger threshold level relative to maximum input level
Parameter
Equivalent key
TR Menu -> Setup -> Video Trigger -> Minimum Power Level
374
<Numeric>
Resolution
-
<Description>
Range
9.2M to113.0128G
Preset value
3G
Unit
Hz
Resolution
100m
<Description>
Range
2.9872G to 26.5128G
Preset value
3G
Unit
Hz
Resolution
100m
<Numeric>
Range
-100 to 0
Preset value
-20
Unit
dB
Resolution
1
7