Sense:tr[1-1]:Narrow:frequency:target - Agilent Technologies E5052A Programmer's Manual

SCPI Command Reference

:SENSe:TR[1-1]:NARRow:FREQuency:TARGet

Parameter
Equivalent key
TR Menu -> Setup -> Freq Range
:SENSe:TR[1-1]:NARRow:FREQuency:TARGet
Syntax
:SENSe:TR[1-1]:NARRow:FREQuency:TARGet <numeric>
:SENSe:TR[1-1]:NARRow:FREQuency:TARGet?
Description
Sets/Reads the target frequency for transient measurement
Parameter When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, and the conversion mode used in
the frequency offset)
When the downconverter is turned on and the RF input is set to 'E5052A
Direct'(Allowable setting range varies depending on whether the frequency offset is
on or off, the LO frequency within the frequency offset, and the conversion mode
used in the frequency offset)
322
Description
R25_6(Preset Set frequency span to 'R25_6' (25.6 MHz)
value)
R1_6 Set frequency span to 'R1_6' (1.6 MHz)
R0_2 Set frequency span to 'R0_2' (200 kHz)
<Numeric>
Range 10M to 117G
Preset value 1G
Unit Hz
Resolution -
<Description>
Range 10M to 113G
Preset value 3G
Unit Hz
Resolution 100m
7