:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:LDATa
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:LDATa <array>
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:LDATa?
Description
Sets/Reads the lower limit values of all measurement points
Parameter
Range
Preset value
Unit
Resolution
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent
:CLEar
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:CLEar
Description
Clears the lower limit line (No Query)
Equivalent key
PN Menu -> Display-> Limit Test -> Delete Lower Limit Line
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent
:COUNt
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:COUNt <numeric>
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:COUNt?
Description
Sets/Reads the number of segments in the lower limit line
Parameter
Range
Preset value
Unit
Resolution
Equivalent key
No equivalent key is available on the front panel.
7
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:LDATa
<Description>
1...1601
-
-
-
<Numeric>
1 to 100
1
-
-
SCPI Command Reference
137