1 Open an MS-DOS window or select 6WDUW © 5XQ .
2 Enter the ping command followed by the IP address of the emulation
If You Have Problems If the response is something like "100% packet loss" or "Destination host
1 Verify your emulation probe is now active and on the network by
Connecting the Emulation Probe to a LAN
Verifying LAN Communications
Verifying LAN Communications
Verify your emulation probe is now active and on the network by issuing a
ping or telnet command to the IP address.
To verify LAN communications using ping
These instructions assume you are using a PC running Microsoft
®
95 or Windows
98. The procedure for other operating systems is slightly
different.
probe.
Example
C:\WINDOWS>ping 192.35.12.6
Pinging 192.35.12.6 with 32 bytes of data:
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time<10ms TTL=254
unreachable", see "Problems with the LAN Interface" on page 97.
To verify LAN communications using telnet
issuing a telnet to the IP address.
This connection will give you access to the emulation probe's built-in terminal
38
E5900B / E5901B User's Guide Supplement
®
®
Windows