OFF or 0(Preset
value)
Equivalent key
FP Menu -> Marker Function -> Couple
FP Menu -> Marker Search -> Couple
:CALCulate:FP[1-1]:ALLTrace:LIMit:FAIL
Syntax
:CALCulate:FP[1-1]:ALLTrace:LIMit:FAIL
Description
Reads out the limit test result (Query Only)
Parameter
ON or 1
OFF or 0(Preset
value)
When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:FP[1-1]:ALLTrace:MARKer:COUPle:STATe
Syntax
:CALCulate:FP[1-1]:ALLTrace:MARKer:COUPle:STATe {ON|OFF|1|0}
:CALCulate:FP[1-1]:ALLTrace:MARKer:COUPle:STATe?
Description
Turns on/of marker coupling function
Parameter
ON or 1
OFF or 0(Preset
value)
Equivalent key
FP Menu -> Marker -> Couple
:CALCulate:FP[1-1]:ALLTrace:MARKer:DISCrete:STATe
Syntax
:CALCulate:FP[1-1]:ALLTrace:MARKer:DISCrete:STATe {ON|OFF|1|0}
:CALCulate:FP[1-1]:ALLTrace:MARKer:DISCrete:STATe?
7
:CALCulate:FP[1-1]:ALLTrace:LIMit:FAIL
Description
Set bandmarker coupling function to 'OFF'
Description
The limit test result is fail
The limit test result is pass
Description
Enable marker coupling function
Disable marker coupling function
SCPI Command Reference
97