SCPI Command Reference
:CALCulate:PN[1-1]:TRACe[1-1]:HOLD
Parameter
Equivalent key
PN Menu -> Marker Function -> Analysis Type
:CALCulate:PN[1-1]:TRACe[1-1]:HOLD
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:HOLD {OFF|MAXimum|MINimum}
:CALCulate:PN[1-1]:TRACe[1-1]:HOLD?
Description
Selects/Reads trace data hold type
Parameter
Equivalent key
PN Menu -> Trace View -> Data Hold
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:FAIL
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:FAIL
Description
Reads out the limit test result (Query Only)
Parameter
When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
136
Description
OFF(Preset value)
Set analysis type to 'Off'
STATistics
Set analysis type to 'Statistics'
INTegral
Set analysis type to 'Integral'
Description
OFF(Preset value)
Set data hold to 'Off'
MAXimum
Set data hold to 'Maximum'
MINimum
Set data hold to 'Minimum'
Description
ON or 1
The limit test result is fail
OFF or 0(Preset
The limit test result is pass
value)
7