Calculate:user[1-1]:Trace[1-8]:Limit:lower:ldata; Calculate:user[1-1]:Trace[1-8]:Limit:lower:segment:clear; Calculate:user[1-1]:Trace[1-8]:Limit:lower:segment:count - Agilent Technologies E5052A Programmer's Manual

SCPI Command Reference

:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:LDATa

When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:LDATa
Syntax :CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:LDATa <array>
:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:LDATa?
Description Sets/Reads the lower limit values of all measurement points
Parameter
Equivalent key No equivalent key is available on the front panel.
:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:SEGM
ent:CLEar
Syntax

:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:SEGMent:CLEar

Description Clears the lower limit line (No Query)
Equivalent key
USER Menu -> Display-> Limit Test -> Delete Lower Limit Line
:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:SEGM
ent:COUNt
Syntax :CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:SEGMent:COUNt <numeric>

:CALCulate:USER[1-1]:TRACe[1-8]:LIMit:LOWer:SEGMent:COUNt?

Description
Sets/Reads the number of segments in the lower limit line
Parameter
212
<Description>
Range 1...1601
Preset value -
Unit -
Resolution -
<Numeric>
Range 1 to 100
Preset value 1
7