Calculate:fp[1-1]:Trace[1-4]:Limit:report[:Data]; Calculate:fp[1-1]:Trace[1-4]:Limit[:State]; Calculate:fp[1-1]:Trace[1-4]:Limit:upper:ldata - Agilent Technologies E5052A Programmer's Manual

SCPI Command Reference

:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:REPort[:DATA]

:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:LOWer:SEGMent:DATA?
Description
Sets/Reads segment data of the lower limit line
Parameter
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:REPort[:DATA]
Syntax
:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:REPort[:DATA]
Description
Reads the limit test results of all measurement points in selected traces (Query Only)
Equivalent key
No equivalent key is available on the front panel.

:CALCulate:FP[1-1]:TRACe[1-4]:LIMit[:STATe]

Syntax
:CALCulate:FP[1-1]:TRACe[1-4]:LIMit[:STATe] {ON|OFF|1|0}
:CALCulate:FP[1-1]:TRACe[1-4]:LIMit[:STATe]?
Description
Turns on/off the limit test function
Parameter
Equivalent key
FP Menu -> Display -> Limit Test -> Limit Test

:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:UPPer:LDATa

Syntax :CALCulate:FP[1-1]:TRACe[1-4]:LIMit:UPPer:LDATa <array>
:CALCulate:FP[1-1]:TRACe[1-4]:LIMit:UPPer:LDATa?
Description
Sets/Reads the upper limit values of all measurement points
112
<Description>
Range 1...400
Preset value -
Unit -
Resolution -
Description
ON or 1 Turn on the limit test function mode
OFF or 0(Preset Turn off the limit test function mode
value)
7