Sense:tr[1-1]:Narrow:frequency:range - Agilent Technologies E5052A Programmer's Manual

off, the LO frequency within the frequency offset, and the conversion mode used in
the frequency offset)
Range
Preset value
Unit
Resolution
When the downconverter is turned on and the RF input is set to 'E5052A
Direct'(Allowable setting range varies depending on whether the frequency offset is
on or off, the LO frequency within the frequency offset, and the conversion mode
used in the frequency offset)
Range
Preset value
Unit
Resolution
When the downconverter is turne on and the RF input is set to
'Downconverter'(Allowable setting range varies depending on the target frequency
and frequency range of the narrow band mode)
Range
Preset value
Unit
Resolution
Equivalent key TR Menu -> Setup -> Phase Reference
TR Menu -> Marker To -> Marker -> Phase Reference

:SENSe:TR[1-1]:NARRow:FREQuency:RANGe

Syntax :SENSe:TR[1-1]:NARRow:FREQuency:RANGe {R25_6|R1_6|R0_2}
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe?
Description Sets/Reads frequency transient range in narrowband mode
7
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe
<Numeric>
9.2M to 117.0128G
1G
Hz
-
<Description>
9.2M to 113.0128G
3G
Hz
100m
<Description>
3G to 26.5128G
3G
Hz
100m
SCPI Command Reference
321