Softkey Functions - Agilent Technologies E5052A Programmer's Manual

Softkey Functions

Bellow table shows the SCPI command list by measurement window and softkey.
FP Menu
Key Operation
Attenuator
Sets/Reads Input Attenuator level on 5dB Step
Input Attenuator
Average
Turns on/off averaging function
Averaging
Restarts averaging
Averaging Restart
Sets/Reads averaging count
Avg Factor
DC Control Voltage
Auto Freq Control
Turns on/off the auto frequency control function.
AFC Status
Executes the auto frequency control once.
Sets/Reads the frequency band in the auto frequency control function
Frequency Band
Sets/Reads the maximum DC control voltage limit
Max Ctrl Voltage
Limit
Max Input Level Sets/Reads the maximum input level
Sets/Reads the maximum number of iterations for the DC control
Max Iteration
voltage-setting loops
Sets/Reads the minimum DC control voltage limit
Min Ctrl Voltage
Limit
Sensitivity Sets/Reads the tuning sensitivity
Sets/Reads the target frequency in the auto frequency control function
Target
Sets/Reads the tolerance limit
Tolerance
Enables DC Control voltage calibration
Control Voltage Cal
DC Control Delay Sets/Reads DC Control delay (sec)
Turns on/off DC Control voltage
DC Control Output
Sets/Reads DC Control voltage
DC Control Voltage
Execute Control Executes DC Control voltage calibration
Voltage Cal
Sets/Reads the maximum DC Control voltage limit
Max Ctrl Voltage
Limit
7
Function
SCPI Command Reference
Softkey Functions
Table 7-2 FP Menu
SCPI Command
:SENS:ATT:LEV
:SENS:FP[1-1]:AVER:STAT
:SENS:FP[1-1]:AVER:CLE
:SENS:FP[1-1]:AVER:COUN
:SOUR:VOLT:CONT:AFC[:STAT
]
:SOUR:VOLT:CONT:AFC:IMM
:SOUR:VOLT:CONT:AFC:FBAN
:SOUR:VOLT:CONT:AFC:LIM:
HIGH
:SOUR:VOLT:CONT:AFC:INP:L
EV:MAX
:SOUR:VOLT:CONT:AFC:ITER
:SOUR:VOLT:CONT:AFC:LIM:
LOW
:SOUR:VOLT:CONT:AFC:SENS
:SOUR:VOLT:CONT:AFC:TARG
:SOUR:VOLT:CONT:AFC:TOL
:SOUR:VOLT:CONT:CORR[:ST
AT]
:SOUR:VOLT:CONT:DEL
:SOUR:VOLT:CONT:LEV:STAT
:SOUR:VOLT:CONT:LEV:AMP
L
:SOUR:VOLT:CONT:CORR:CO
LL:ACQ
:SOUR:VOLT:CONT:LIM:HIGH
405