Lan Remote Control System; System Configuration - Agilent Technologies E5052A Programmer's Manual

Overview of Remote Control

LAN Remote Control System

LAN Remote Control System
The LAN (Local Area Network) remote control system provides two methods for
controlling the E5052A: using the SICL-LAN server and using the telnet server.

System configuration

Use LAN cables to connect the E5052A and the external controller (computer). Figure 2-2
shows the configuration of the LAN remote control system.
Figure 2-2 Configuration of LAN remote control system
Required equipment
1. E5052A
2. External controller (personal computer or workstation that can be connected to LAN,
with Agilent I/O Library installed)
3. Other devices (other instruments and/or special-purpose peripherals)
4. LAN cable for connecting the E5052A with the external controller
Preparing the E5052A
Before controlling the E5052A via LAN, you need to configure the network function. For
User s Guide
detailed information on the procedure, refer to ' .
2
33