Esa displayport phy compliance test standard version 1 revision 2b agilent method of implementation (moi) for displayport cable compliance tests (45 pages)
Basic Calibration Before executing calibration, you need to select a calibration kit. If you use a calibration kit other than a predefined one, you need to define it. If the connector type of the standard of the calibration kit you use has polarity (the distinction between male and female), you need to change the standard class definition of the calibration kit depending on the standard you actually use.
Page 4
makes it possible to perform measurements with the highest possible accuracy. A total of twelve error terms, six each in the forward direction and the reverse direction, are used in a calibration. 1. Press key. 2. Click Cal Kit, then select the calibration kit. 3.
DEGREE 2 in IEC61010-1. The E5071C is an INDOOR USE product. The LEDs in the E5071C are Class 1 in accordance with IEC60825-1, CLASS 1 LEDPRODUCT Ground the Instrument - To avoid electric shock, the instrument chassis and cabinet must be grounded with the supplied power cable's grounding prong.
Page 6
Direct current. On (Supply). Off (Supply). In-position of push-button switch. Out-position of push-button switch. A chassis terminal; a connection to the instrument's chassis, which includes all exposed metal structure. Stand-by.