Sense:tr[1-1]:Wide:sweep:points; Sense:tr[1-1]:Wide:time:offset - Agilent Technologies E5052A Programmer's Manual

SCPI Command Reference

:SENSe:TR[1-1]:WIDE:SWEep:POINts

When the downconverter is turned on and the RF input is set to 'E5052A Direct' with
the frequency offset is on (Allowable setting range varies depending on whether the
LO frequency within the frequency offset, and the conversion mode used in the
frequency offset)
When the downconverter is turned on and the RF input is set to 'Downconverter'
Equivalent key No equivalent key is available on the front panel.
:SENSe:TR[1-1]:WIDE:SWEep:POINts
Syntax
:SENSe:TR[1-1]:WIDE:SWEep:POINts
Description Reads the number of measurement points in the wideband mode for transient measurement
(Query Only)
Equivalent key
No equivalent key is available on the front panel.

:SENSe:TR[1-1]:WIDE:TIME:OFFSet

Syntax :SENSe:TR[1-1]:WIDE:TIME:OFFSet <numeric>
:SENSe:TR[1-1]:WIDE:TIME:OFFSet?
Description
offset for reference point
326
<Description>
Unit Hz
Resolution -
<Description>
Range 160M to 113G
Preset value 3.15G
Unit Hz
Resolution -
<Description>
Range 3.5G to 26.5G
Preset value 3.5G
Unit Hz
Resolution 100m
7