SCPI Command Reference
:SENSe:FP[1-1]:DCONverter:SSEarch:EXECute
:SENSe:FP[1-1]:DCONverter:FREQuency?
Description
Sets/Reads information on the furequency supplied to the downconverter.
Parameter
When the frequency band is 3G to 10GHz
When the frequency band is 9G to 26.5GHz
Equivalent Key
FP Menu -> Setup -> Nominal Frequency
:SENSe:FP[1-1]:DCONverter:SSEarch:EXECute
Syntax
:SENSe:FP[1-1]:DCONverter:SSEarch:EXECute
Description
Searches carrier signal and reflects the result to information on the input frequency of the
downconverter. (No Query)
Equivalent Key
FP Menu -> Setup -> Carrier Search
:SENSe:FP[1-1]:FBANd
Syntax
:SENSe:FP[1-1]:FBANd {LOW|HIGH}
:SENSe:FP[1-1]:FBANd?
Description
Selects frequency band
Parameter
304
<Description>
Range
3G to 10G
Preset value
3G
Unit
Hz
Resolution
100m
<Description>
Range
9G to 26.5G
Preset value
9G
Unit
Hz
Resolution
100m
Description
LOW
Set frequency band to 'LOW'
7