Sense:sp[1-1]:Frequency:start - Agilent Technologies E5052A Programmer's Manual

frequency within the frequency offset, and the conversion mode used in the frequency
offset)
Range
Preset value
Unit
Resolution
Equivalent key
SP Menu -> Start/Center -> Span
SP Menu -> Stop/Span -> Span

:SENSe:SP[1-1]:FREQuency:STARt

Syntax
:SENSe:SP[1-1]:FREQuency:STARt <numeric>
:SENSe:SP[1-1]:FREQuency:STARt?
Description
Sets/Reads the start value of frequency span
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or off
, the LO frequency within the frequency offset, and the conversion mode used in the
frequency offset)
Range
Preset value
Unit
Resolution
When the downconverter is turned on and the RF input is set to 'E5052A Direct' RF
(Allowable setting range varies depending on whether the frequency offset is on or off
, the LO frequency within the frequency offset, and the conversion mode used in the
frequency offset)
Range
Preset value
Unit
Resolution
7
:SENSe:SP[1-1]:FREQuency:STARt
<Numeric>
100 to 15M
15M
Hz
200m
<Numeric>
9M to 116.99999995G
992.5M
Hz
100m
<Description>
9M to 112.99999995G
2.9925G
Hz
100m
SCPI Command Reference
317