Parameter
Range
Preset value
Unit
Resolution
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:REPort[:DATA]
Syntax
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:REPort[:DATA]
Description
Reads the limit test results of all measurement points in selected traces (Query Only)
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit[:STATe]
Syntax
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit[:STATe] {ON|OFF|1|0}
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit[:STATe]?
Description
Turns on/off the limit test function
Parameter
ON or 1
OFF or 0(Preset
value)
Equivalent key
SP Menu -> Display -> Limit Test -> Limit Test
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:UPPer:LDATa
Syntax
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:UPPer:LDATa <array>
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:UPPer:LDATa?
Description
Sets/Reads the upper limit values of all measurement points
7
:CALCulate:SP[1-1]:TRACe[1-1]:LIMit:REPort[:DATA]
<Description>
1...400
-
-
-
Description
Turn on the limit test function mode
Turn off the limit test function mode
SCPI Command Reference
163