:TRIGger:TR[1-1]:SOURce
Syntax
:TRIGger:TR[1-1]:SOURce {INTernal|EXTernal|MANual|BUS|WVIDeo|NVIDeo}
:TRIGger:TR[1-1]:SOURce?
Description
Selects trigger source
Parameter
INTernal(Preset
value)
EXTernal
MANual
BUS
WVIDeo
NVIDeo
Equivalent key
TR Menu -> Trigger -> Source
:TRIGger:TR[1-1]:WIDE:VIDeo:FREQuency:CENTer
Syntax
:TRIGger:TR[1-1]:WIDE:VIDeo:FREQuency:CENTer <numeric>
:TRIGger:TR[1-1]:WIDE:VIDeo:FREQuency:CENTer?
Description
Sets/Reads the video trigger frequency value for wideband mode in the transient
measurement
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, the conversion mode used in the
frequency offset, and the transient frequency range of the wideband mode)
Range
Preset value
Unit
Resolution
When the downconverter is turned on and the RF input is set to 'E5052A Direct'
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, the conversion mode used in the
7
Description
Set trigger source to 'INTernal'
Set trigger source to 'EXTernal'
Set trigger source to 'MANual'
Set trigger source to 'BUS'
Set trigger source to 'WVIDeo'
Set trigger source to 'NVIDeo'
<Numeric>
50M to 117G
1G
Hz
-
SCPI Command Reference
:TRIGger:TR[1-1]:SOURce
375