Sony GY-2120WD Maintenance Manual page 50

1-11. GY-2120 SCSI Control Software scsitool.exe
4) OPTION ... Function for Setting GY Com-
mand Parameter
Data which need to be set by the command for
GY can be set by command.
♦Refer to Fig. 8.
How to use : Click the item to be set using the
mouse. The parameter setting
dialog box will be displayed for
each command. Input the values,
and click the "OK" button.
(Use as a set with the "3)
GY_CMD".)
[Popup Menu]
. REQ/INQ CMD SET
. READ CMD SET
. WRITE CMD SET
. WRITE FM CMD SET — Setting of parameters of Write Filemarks
. SPACE CMD SET
. MDSEL CMD SET
. COPY CMD SET
. MDSNS CMD SET
. LD/UNLD CMD SET
. PREVENT CMD SET
. LOCATE CMD SET
. READ POS CMD SET — Setting of parameters of Read Position command
. WRITE BUF CMD SET — Setting of parameters of Write Buffer command
. READ BUF CMD SET — Setting of parameters of Read Buffer command
. MT/UNMT CMD SET — Setting of parameters of Mount/Unmount command
. EJECT CMD SET
1-40
— Setting of parameters of Request Sense and Inquiry
— Setting of parameters of Read command
— Setting of parameters of Write command
— Setting of parameters of Space command
— Setting of parameters of Mode Select command
— Setting of parameters of Copy command
— Setting of parameters of Mode Sense command
— Setting of parameters of Load/Unload command
— Setting of parameters of Prevent/Allow command
— Setting of parameters of Locate command
— Setting of parameters of Eject command
<Fig. 8-1> Setup Menu of GY Single Commands
GY-2120WD/WS