Table of Contents
Advertisement
3-2. Reel Block
4. Smear Grease
(1) Wipe grease from the worm gear, then clean
it.
(2) Smear grease on the worm gear.
5. Install the S and T Reel Shift Plate
Assemblies
Refer to steps 8 through 10 in Section 3-2-3.
Adjustment after Replacement
6. Confirm the Cassette Pillar Height
Refer to Section 4-3.
7. Connect the Flat Cable
Refer to step 15 in Section 3-2-3.
8. Confirm the Reel Shift Motor
Operation
Refer to Section 6-2.
(SV17: Reel Shift Motor Check)
3-22
Woom gear (Smear grease)
Smear Grease
GY-2120WD/WS
Advertisement
Table of Contents
Troubleshooting
