6-2. Description of Commands
!\ : C_REC_CONTROL
(b7) - (b4)
REC MODE
0x : Finish
1x : Crash REC
2x : Edit REC, REC with IN
3x : (Not Used)
|
|
Fx : (Not Used)
(b3) - (b0)
REC STATE
x0 → x6 : REC START
x9
: REC STOP
xF
: REC CANCEL
others
: Nothing
Normal value
!; : PORT_T
bit2 : Always 1
bit1 : Always 1
bit0 : 1 Unrecovered Error (C2 Error) Present
0 Unrecovered Error (C2 Error) Absent
Unrecovered Error (C2 Error)
The Unrecovered Error (C2 Error) is detected delayed by 3IDs during read and write. Conse-
quently, it may be at 07 when 3ID from the IN point. Also, although the C2 error of the last 3IDs
is detected, it is not recorded in the Time Code Log.
If cannot be corrected by C2 Error correction, as data cannot be recovered, this is called unre-
coverd error.
Normal value
6-72
SV->SYS
SYS->SV
SYS->SV
SYS->SV
Write
Before stop Others
29
26
Present
07
3ID area from IN point
06, 07
Read
00
Absent
06
Others
06
GY-2120WD/WS