Table of Contents
Advertisement
i)
SV Log Display (Drive maintenance mode command No. 95)
Enter "95" after MDRV and press the ENTER key.
This function displays an SV log on the personal computer screen.
The SV log is automatically backed up when an error occurs in the servo system.
MDRV => 95
SV Logger Disp
Area No. = 00
Error Code = 05
Offset 0--------4--------8--------C--------10-------14-------18-------1C------
00 02030576 00900200 0823023D 6B600132 010045A7 00FE02FE 088A0000 008B3A61
20 13270303 7ADC1380 03000045 00440045 00450044 00120000 00000121 0046FF7D
40 00000488 0480003C 00010488 0AF3E8A9 03A20003 0074E13A 00081AA2 1B0C1B0C
60 1AAFFFFF 010200DA 00020330 00000100 00000000 00000000 00000000 00000000
--------------------------------------------------------------------------
< Q:quit/T:top/B:bottom/P:prev/other:next > ?
Description of display
(1) Error Code : Indicates the error code generated when a log is displayed.
Area No
: Indicates the log number.
n
The log number with Area No = 0 is the latest one.
(2) Indicates the internal variable value of SV firmware when an error occurs.
(3) Description of key entry
P : Displays the previous log.
T : Displays the top log.
B : Displays the last log.
Q : Quits the log command.
Entering the keys other than described above displays the screen below.
GY-2120WD/WS
6-2. Command Description
6-59
Advertisement
Table of Contents
Troubleshooting
