Sony GY-2120WD Maintenance Manual page 425

6-6-1. PB All Automatic Adjustment
n
When this adjustment is performed, 6-6-2. PB Level Automatic Adjustment, 6-6-3. PLL Automatic
Adjustment, and 6-6-4. PB Equalizer Automatic Adjustment are not required.
Prepares an alignment tape YR5-1. (Adjustment start tape address: IDR: 0 through 72000)
. To move the tape address during adjustment start, use the control software of GY-2120 (after insertion
of the cassette).
For explanation of RF01: PB All Adjust, refer to Section 6-2.
(1) Enter RF01: PB All Adjust.
(2) Insert the alignment tape YR5-1.
(3) Press the Y key to initiate adjustment.
(4) When the adjustment succeeds, message "ALL Adjust
Complete" is displayed.
*
When message "(Tape end detected)" is displayed,
rewind the tape to tape top, then readjust.
(5) If necessary, enter RF07: RF NV-RAM Save
(Refer to Section 6-6-6).
GY-2120WD/WS
http://getMANUAL.com
------>RF01
RF Adjust [Auto Adjust]
PB All Adjust
Set YR5-1 (Alignment Tape)
Are you ready (y/n/else=Eject)? Yes
PB PLL Adjust....OK
PB Level Adjust....OK
PB Equalizer Adjust....OK
PB Level Adjust....OK
ALL Adjust Complete
------>_
6-6. RF System Alignment
6-201