Table of Contents
Advertisement
6-2-2. Log Display Mode
This mode is used to display the history of the SCSI sequence and internal operation state.
The log display mode is activated when "LOG" are entered from the PC in a capital letter. Message
"LOG=>" is then displayed as a prompt. Enter a command number (or command) after this prompt and
press the ENTER key. Command function is executed at that time.
Enter "QUIT" after this prompt and press the ENTER key. The log display mode is then terminated.
n
The log display mode cannot be activated from another mode. Terminate another mode, then enter
"LOG".
Help command
In the log display mode, there is a help command that displays the function list in this mode. To execute
this help command, enter a command and press the ENTER key.
LOG=>help
+===[ LOGGER MENU ]==========================================================+
|
| quit: Quit Tool
|
| clear: Clear Log
|
|
| 1: Detail SCSI Protocol
| 3: SCSI Command Sequence
| 5: Serial Command Sequence
| 97: Bus Error Counter
|
|
+============================================================================+
Function List Display in Log Display Mode using Help Command
Clear command
This command is used to clear the contents of all logs. To execute this clear command, enter "clear" and
press the ENTER key.
n
The cleared log data cannot be restored.
Log Upload command
This command is used to upload the contents of all log on the PC, etc.
Enter the "alog" after accomplishing the text's capture condition, then press the ENTER key.
GY-2120WD/WS
help: Display help Menu
upload: Log Upload
alog : All Log Upload
2: 2-Port RAM Command
4: Other History
98: Media Error Counter
**
Copyright (c) 19
19
|
|
|
|
|
|
|
|
|
|
|
**
, SONY Corp. |
6-2. Command Description
6-23
Advertisement
Table of Contents
Troubleshooting
