Sony GY-2120WD Maintenance Manual page 258

6-2. Command Description
Log Message
Make Partition complete!!
Make Partition - Error Code = xxxxxxxx
Mode Select!!
Make VSIT Complete!!
Make VSIT Fail!!- Error Code = xxxxxxxx
Read (2-port) Fail!!
Read ULINF Complete!!
Read ULINF Fail!! - Error Code = xxxxxxxx
Read VSIT Complete!!
Read VSIT Fail!! - Error Code = xxxxxxxx
Recover Switch ON !!
Recover complete!!
Recover Fail!! - Error Code = xxxxxxx
Search (2-port) Fail!!
Single Read (2-port) Fail!!
Unload complete!!
Unload Fail!! - Error Code = xxxxxxxx
Warning!! - Edac Corrected or Retry OK
Warning!! - Parity Error Retry OK
Write (2-port) Fail!!
6-34
Contents
Created a new volume.
Could not create new volume due to error.
Error Code → Displays the SCSI error code in 4 bytes
The mode select value was changed.
Completed creating VSIT.
Failed to create VSIT due to error.
Error Code → Displays the SCSI error code in 4 bytes
The SYS CPU failed reading.
Confirmed reading of unload information data.
Could not confirm reading of ULINF data due to error.
Error Code → Displays the SCSI error code in 4 bytes
Confirmed reading of VSIT data.
Could not confirm reading of VSIT data due to error.
Error Code → Displays the SCSI error code in 4 bytes
The GY-2120 RECOVER button was pressed.
Completed RECOVER.
Error Code → Displays the SCSI error code in 4 bytes
Failed in PREROLL at the SYS CPU
Failed in single read at the SYS CPU
Completed unmounting.
Failed in unloading due to error.
Error Code → Displays the SCSI error code in 4 bytes
1 bit error occurred at the memory, and it was corrected.
Error above 2 bits occurred.
Parity error occurred during data transfer between the PR and
memory.
The SYS CPU failed in writing.
GY-2120WD/WS