Table of Contents
Advertisement
SV0C
Servo NV-RAM Save (Servo adjustment command)
Function: Saves the adjustment data of servo electronic VR in the servo NV-RAM
Operation: (1) Enter command.
Example:
------>sv0c
Servo Adjust [NV-RAM Control]
SV NV-RAM Save
Are you ready (y/n)? Yes
Saving NV-RAM1....OK
Saving NV-RAM2....OK
Data Saved
------>_
GY-2120WD/WS
(Non-volatile RAM).
n
Once this command is executed, the servo adjustment data cannot be returned to the state
before adjustment.
After the title, the following message is then displayed on the screen.
Are you ready (y/n)?
* To stop the execution of adjustment, press the N key.
(2) Press the Y key to initiate data transmission.
(3) After transmission is completed, message "Data Saved" is displayed on the screen.
6-2. Description of Commands
6-99
Advertisement
Table of Contents
Troubleshooting
