Sony GY-2120WD Maintenance Manual page 159

Installation
3. Install the T Drawer Assembly
(1) Clean the mounting surfaces of the T drawer
assembly and the chassis with a cleaning
cloth moistened with cleaning fluid.
(2) Put the T drawer arm assembly on the
chassis, then tighten the two screws.
(3) Connect the connector as shown in the figure.
(4) Bind the harness with the harness clamper (or
the equivalent).
GY-2120WD/WS
T drawer assembly
Screw
(PWH3 x 8)
Install the T Drawer Assembly
3-6. Drum Exit Side Block
3-79