Sony GY-2120WD Maintenance Manual page 272

6-2. Command Description
Help command
In the service set mode, there is a help command that displays the function list in this mode. To execute
this help command, enter a command and press the ENTER key.
SERV=>help
+===[ SERVICE MENU ]=========================================================+
|
| quit: Quit Tool
|
| 1: Display Service Values
|
| << DISPLAY SERVICE VALUES >>
| 11: Display Baud Rate
| 13: Display Ignore Wide Residue Mode
| 14: Display BT bit Ignore Mode
| 15: Display REW bit Mode
|
| 71: Display PetaServe Mode
| 72: Display A-A Mode
| 73: Display COMP SW Mode
|
|
+============================================================================+
SERV=>
n
If a tape is loaded, the following menu is not appeared on the display to prevent the values from changing
by mistake.
2 : Set All Service Values
21 : Set Baud Rate
23 : Set Ignore Wide Residue Mode
24 : Set BT bit Ignore Mode
25 : Set REW bit Mode
81 : Set PetaServe Mode
82 : Set A-A Mode
83 : Set COMP SW Mode
If either switches, S202-1 or S202-2 on the IF-682/683 boards, is set to on, the following menu is not
appeared on the SERV help.
71 : Display PetaServe Mode
72 : Display A-A Mode
81 : Set PetaServe Mode
82 : Set A-A Mode
6-48
help: display help Menu
2: Set All Service Values
<< SET SERVICE VALUES >>
21: Set Baud Rate
23: Set Ignore Wide Residue Mode |
24: Set BT bit Ignore Mode
25: Set REW bit Mode
81: Set PetaServe Mode
82: Set A-A Mode
83: Set COMP SW Mode
Copyright (c) 19 19 ** , SONY Corp. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
**
GY-2120WD/WS