Sony GY-2120WD Maintenance Manual page 352

6-2. Description of Commands
SV1F
SV Initial Data Set (Servo check command)
Function: Set the initial adjustment data to the electronic volume for servo.
Operation: (1) Enter a command.
Examples:
. For SV1F
------>sv1f
SV Adjust [NV-RAM Control]
SV Initial Data Set
Are you ready (y/n)? Yes
Setting....OK
Data Set
------>
6-128
Are you ready (y/n)?
* To stop the execution of adjustment, press the N key.
(2) Press the Y key to initiate data transmission.
(3) After transmission is completed, messages below are displayed on the screen.
"Data Set"
GY-2120WD/WS