Table of Contents
Advertisement
6-2. Description of Commands
SV19
S Reel Brake Solenoid Check (Servo check command)
SV1A
T Reel Brake Solenoid Check (Servo check command)
Function: SV19: Checks the function of an S reel brake solenoid.
Operation: The commands above are the same in operation.
Examples:
. For SV19
------>sv19
Servo Check [Plunger solenoid check]
S Reel Brake Solenoid Check
[KEY] CTRL-C=EXIT
Manual Check Start
S Reel Brake Solenoid-OFF
Exiting...
------>_
6-120
SV1A:Checks the function of a T reel brake solenoid.
(1) Enter command.
* A cassette tape is automatically ejected when it has been inserted into this unit in this case.
(2) Press the J key. Message "-ON" is displayed on the screen. Confirm with a sound that
the brake solenoid is turned on. (Brake off state)
(3) Press the K key. Message "-OFF" is displayed on the screen. As a result, the iron core
of the brake solenoid returns to the former position. (Brake on state)
(4) To terminate a check, press the CTRL and C keys simultaneously.
* When the CTRL and C keys are pressed simultaneously, the solenoid automatically returns to the OFF state.
J=Solenoid-ON
K=Solenoid-OFF
. For SV1A
------>sv1a
Servo Check [Plunger solenoid check]
T Reel Brake Solenoid Check
[KEY] CTRL-C=EXIT
J=Solenoid-ON
K=Solenoid-OFF
Manual Check Start
T Reel Brake Solenoid-OFF
Exiting...
------>_
GY-2120WD/WS
Advertisement
Table of Contents
Troubleshooting
