Cleaning Roller And Rotary Head Cleaner Assembly Replacement - Sony GY-2120WD Maintenance Manual

3-3. Drum Block
3-3-4. Cleaning Roller and Rotary Head Cleaner Assembly
Replacement
Outline
Replacement
1. Remove the Harness (CN851/PD-35 Board)
2. Remove the Rotary Head Cleaner Assembly
3. Replace the Cleaning Roller
4. Install the Rotary Head Cleaner Assembly
5. Adjust the Cleaning Roller Position
6. Install the Harness (CN851/PD-35 Board)
Adjustment after Replacement
7. Confirm the Cleaning Solenoid Operation
(SV1B: Cleaning Roller Solenoid Check) (Refer to Section 6-2. )
Note
When the cleaning roller is replaced, it is recommended to replace the CR spacer at
the same time.
. CR spacer : 3-182-765-02
Preparation
1. Turn the power off.
2. Remove the upper lid. (Refer to Section 1-1-1.)
3. Remove the plate MD. (Refer to Section 1-1-1.)
4. Remove the cassette compartment. (Refer to Section 1-1-2.)
3-40
GY-2120WD/WS