6-2-6. Drive Maintenance (MDRV) Mode
This mode is used to check and adjust the drive of the GY-2120.
The service set mode is activated by inputting four characters "MDRV" from a PC. "MDRV=>" is then
displayed as a prompt. Enter a command number (or command) after this prompt and press the ENTER
key. The command function is executed at that time. To terminate the service set mode, enter "QUIT"
after this prompt and press the ENTER key.
n
The service set mode cannot be activated from another mode. To enter the service set mode, terminate
the current mode and enter "MDRV".
Help command
The drive maintenance mode has a help command that lists the functions of this mode. To display the
list, enter a command and press the ENTER key.
MDRV => help
+--<< GY-2120 Maintenance Menu >>--------------------------------------------+
|
quit: Quit Tool
|
help: display help Menu
|
|
1. Remote Control(factory use only)
|
2. SV/RF Maintenance Mode
|
|
80. SYS/SV All Log Upload
|
85. SV Log Upload
|
86. Base Mode Log Upload
|
87. Status Log Upload
|
88. Time Code Log Upload
|
|
+----------------------------------------------------------------------------+
MDRV =>
a) Remote Control (factory use only) (Drive maintenance mode command No. 1)
Used for manufacturing. Unused.
GY-2120WD/WS
81. MDRV All Log Upload
95. SV Log Display
96. Base Mode Log Display
97. Status Log Display
98. Time Code Log Display
Copyright (c) 19
19 , SONY Corp. |
**
|
|
|
|
|
|
|
|
|
|
|
|
**
6-2. Command Description
6-57