Sony GY-2120WD Maintenance Manual page 295

7 to !/ : READ_TIME (BCD, Time Code)
Absolute Time Code value at which LTC was read from the tape
Absolute Time Code value at which LTC was written on the tape
gg : hours
hh : minutes
ii : seconds
jj : Frames
!- : READ_UB
UB value read from the tape
UB value written on the tape
Normal value 00000000 (Because UB is not used)
!= : ERROR_CODE
System error code
The aa of 2xaa are recorded.
Normal value 00
![ : ABORT_CODE
Function Abort Reason Code :
—————————————————————————————————
o 00 = non_abort
o 01 = eot_reach
o 02 = park_bot
o 03 = park_eot
o 04 = rec_inhibit
o 05 = search_abort
(Aborted when not found after changes the search direction four times)
o 06 = incorrect_preroll : preroll length incorrect
(Should be more than 124 in front from the IN point for the "with IN" command)
o 07 = servo_unlock
o 08 = not_IN_set
Normal value 00
!] : C_EQ_OUTPORT
SYS->SV (Free Timing)
; (b7) H : REC LOCK
; (b6) L : REC MODE
; (b5) L : EQ-LP2
; (b4) L : EQ-LP1
Normal value
GY-2120WD/WS
http://getMANUAL.com
: no error
: EOT reached at FWD/REC
: park at BOT, command direction wrong
: park at EOT, command direction wrong
: REC inhibit when REC message received
: search/preroll target point not found
: servo not locked at PLAY/REC IN timing
: IN-point is not set when "with IN" or Preroll command
Write Read
30 F0
6-2. Description of Commands
6-71