Removing The Heim Joint - KTM 350 EXC-F EU 2012 Repair Manual

04/SHOCK ABSORBER, SWINGARM

Removing the heim joint

8.19
–
Remove screwsleeve
–
Remove adjusting screw
Info
Do not lose balls
200806-10
–
Remove rubber plug
–
From the opposite side, press rebound needle
200807-10
Condition
The shock absorber has been demounted.
–
Clamp the shock absorber in a vise using soft jaws.
–
Remove the collar bushing of the heim joint.
Pin (T120) (
–
Turn the shock absorber around and remove the second heim joint collar bushing.
200799-10
–
Remove seal ring
200800-10
–
Press the heim joint against a lock ring using the special tool.
Pressing tool (T1207S) (
–
Remove the second lock ring
200801-10
.
2
.
3
and spring.
A
.
4
p. 280)
on both sides.
1
p. 281)
.
2
out of the piston rod.
5
51