04/SHOCK ABSORBER, SWINGARM
–
Press in shaft seal rings
Info
The heim joint for the shock absorber at the swingarm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
305062-10
–
Mount spacers
305061-10
–
Position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, bottom shock
absorber
Info
Raise the wheel slightly to make it easier to mount the screw.
305060-10
Follow-up work
–
Remove the motorcycle from the lift stand. (
on both sides with the open side facing inward.
3
on both sides.
2
.
1
M12
80 Nm
Loctite
®
2701
(59 lbf ft)
p. 10)
63