01/FORK, TRIPLE CLAMP
Installing the lower triple clamp (EXC-F SIX DAYS)
5.22
3
0 0 3
2
0 0 2
1
0 0 1
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
–
Slide on protective ring
101331-10
–
Position the upper triple clamp with the steering.
–
Mount screw
–
Position the clutch line, wiring harness, and voltage regulator. Mount and tighten
screws
.
5
Guideline
Remaining screws, chassis
101337-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
101338-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
101339-10
–
Tighten screw
Guideline
Screw, top steering head
101340-10
p. 270)
1
and O-ring
.
2
3
but do not tighten yet.
4
toward the front.
6
.
7
.
4
is correctly positioned.
M6
10 Nm (7.4 lbf ft)
M8
12 Nm (8.9 lbf ft)
M20x1.5
12 Nm (8.9 lbf ft)
31