05/EXHAUST
Removing main silencer
9.3
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Installing the main silencer
9.4
Changing the glass fiber yarn filling of the main silencer
9.5
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over a period, the fibers of the insulating material vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
–
Disconnect spring
–
Remove screws
101353-10
–
Mount the main silencer. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Reconnect spring
101353-11
Preliminary work
–
Remove the main silencer. (
.
1
and take off main silencer.
2
M6
.
2
p. 65)
.
1
10 Nm (7.4 lbf ft)
65