Installing The Shift Drum; Installing The Shift Rails; Installing The Left Engine Case - KTM 350 EXC-F EU 2012 Repair Manual

30/ENGINE ASSEMBLY

Installing the shift drum

21.4

Installing the shift rails

21.5

Installing the left engine case

21.6
–
Push shift drum
–
Put shift forks
Info
Do not misplace the shift rollers.
305027-11
–
Install shift rail
305026-11
–
Install shift rail
305025-11
–
Mount the dowels.
–
Degrease the sealing area. Apply the sealing compound to the left section of the
engine case.
Loctite ® 5910
–
Mount the special tool on the crankshaft.
Mounting sleeve (77229005000) (
302680-10
–
Mount the left section of the engine case. If necessary, strike it lightly with a rub-
ber mallet and turn the transmission shafts.
Info
Do not use the screws to pull the two sections of the engine case together.
–
Mount screws
Guideline
Screw, engine case
305160-10
–
Mount screws
Guideline
Screw, engine case
–
Mount screws
Guideline
Screw, engine case
into the bearing seat.
1
in the shift drum.
2
together with upper spring
1
together with upper spring
3
p. 276)
but do not tighten yet.
1
M6x55
but do not tighten them yet.
2
M6x65
but do not tighten them yet.
3
M6x85
and the lower spring.
2
.
4
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
158